Saturday, July 14, 2018

Pioneer DDJ-RB Drivers and Firmware Download

View Article
What are the system requirements are concerned, the manufacturer has a minimum stated machine with a Core 2 Duo processor at two gigahertz, four gigabytes of memory and a resolution of 1280 × 768, while the recommendation to have a processor from the Core series (i7, i5, i3), more memory and higher resolution. Operating systems are supported by Windows 7 or later, and Mac OS 10.9 or later, updated to the latest versions.

With the hardware you get the key to activate RekordboxDJ software, while the software itself must be downloaded from the manufacturer's website. After installing drivers and software, in order to access the mix, we first had to register on the Quo site. We did not do it normally through a program on one of the computers, because for some reason we reported that we did not have a connection to the Internet, and we had to do offline activation (even for trial, yes). After that, we successfully launched the program and tried the functions. When using for the first time, you need to pay attention, because when starting, the program enters the CD player registry mode, regardless of the fact that we selected the DJ controller mode in the initial "wizard", and the mix mode for the mix should be selected when the program starts. After that, the program automatically recognizes the controller and moves "kissing".

PIONEER DDJ-RB Drivers and Firmware Download

As far as the trial is concerned, it works great, but we also have a few complaints. There is no total kill in the EQ section of the mixer (by Hi, Mid and Low), but only on Trim by channel and master. When selecting songs, it always returns to the beginning of the list at Knob rotation , which may change in settings, but it is not clear why this would be useful to anyone, even as an option. Pitch (although short, hardware) has a super response and is accurate, but most importantly, it has a click on zero. Jog controls are exactly in the Pioneer style - they are large and not "light", which makes them very comfortable to control the software. Crossfaderis somewhat of a lower quality than sliding and circular level controllers per channel. Filter per channel, located just below the EQ section is also a big plus. Navigating through folders is easy, and there's no need to touch the laptop when searching and downloading songs.

This controller is both priced and quality designed for people who are just entering the world of digital DJs. Of course, the overall quality and our impression in the use of its application are not limited to beginners, but on the contrary, we see this controller as a good tool for anyone who wants a decent controller at a decent price, with which he will be able to comfortably run his "gig" in bar or club, while not having a bad quality that can be experienced with certain devices from the same price range. If you decide to buy this device, it is recommended that the songs be first recorded in Rekordbox, and then they are released, because in this way you have all the essential elements pre-set and ready to rumble.

FIRMWARE UPDATE

  • DDJ-RB FIRMWARE WINDOWS
    Download link (0.68 MB)
  • VERSION
    1.03
  • LATEST UPDATE
    14/Feb/2017

  • Description
    This firmware is a system software program for your DJ CONTROLLER.
    Please update the latest firmware to enhance the product's performance.
    Ver.1.03 Update
    [FIXED]
    • Sometimes hi-pitched noise occurred and the DDJ-RB hanged after using it for a long time. 
  • DDJ-RB FIRMWARE MAC
    Download link (0.91 MB)
  • VERSION
    1.03
  • LATEST UPDATE
    14/Feb/2017

  • Description
    This firmware is a system software program for your DJ CONTROLLER.
    Please update the latest firmware to enhance the product's performance.
    Ver.1.03 Update 
    [FIXED]
    • Sometimes hi-pitched noise occurred and the DDJ-RB hanged after using it for a long time.

DRIVERS

  • DDJ-RB DRIVER FOR WINDOWS 10
    Download link (3.79 MB)
  • VERSION
    1.210
  • LATEST UPDATE
    21/Nov/2016

  • Description
    DRIVER FOR WINDOWS 10
    This driver will allow you to connect your DDJ to a computer.
    Unzip the downloaded file "DDJ****exe.zip". This file will appear: DDJ****.exe
    Ver.1.210 Update
    [FIXED]
    • DJ applications running on certain versions of Windows 10 did not detect Pioneer DJ equipment.
    If your Windows OS is Windows 8.1 or 7, please use the DRIVER FOR WINDOWS 8.1 / 7.
  • DDJ-RB DRIVER FOR WINDOWS 8.1 / 7
    Download link (3.77 MB)
  • VERSION
    1.200
  • LATEST UPDATE
    10/Nov/2016

  • Description
    DRIVER FOR WINDOWS 8.1 / 7
    This driver will allow you to connect your DDJ to a computer.
    Unzip the downloaded file "DDJ****exe.zip". This file will appear: DDJ****.exe
    Ver.1.200 Update
    [FIXED]
    • ASIO buffer size could not be changed at the Setting Utility on the 64-bit version of Windows.
  • DDJ-RB DRIVER FOR MAC EL CAPITAN OR LATER
    Download link (0.79 MB)
  • VERSION
    2.0.0
  • LATEST UPDATE
    04/Oct/2016

  • Description
    DRIVER FOR MAC EL CAPITAN OR LATER
    This driver will allow you to connect your DDJ to a computer. 
    Unzip the downloaded file "DDJ****dmg.zip". This file will appear: DDJ****dmg
    Ver.2.0.0 release
    • Posted the first setting utility software for DDJ-RB.
    If your Mac OS is v10.10 or older, please use the DRIVER FOR MAC YOSEMITE.
    Open source notice (APSL) :
    This software includes open source software codes licensed under Apple Public Source License, Version 2.0 ("APSL"). 
  • DDJ-RB DRIVER FOR MAC YOSEMITE
    Download link (0.79 MB)
  • VERSION
    1.0.0
  • LATEST UPDATE
    27/Apr/2016

  • Description
    DRIVER FOR MAC YOSEMITE
    This driver will allow you to connect your DDJ to a computer. 
    Unzip the downloaded file "DDJ****dmg.zip". This file will appear: DDJ****dmg
    Ver.1.0.0 release
    • Posted the first setting utility software for DDJ-RB.

    Open source notice:
    This software includes open source software codes licensed under Apple Public Source License, Version 2.0 ("APSL"). The machine readable copy of the corresponding source code is available here.

Yamaha Steinberg USB Drivers Download

View Article
Download Yamaha Steinberg USB Drivers. Steinberg supplies the device with a USB cable, which is theoretically enough to start. In addition, the USB audio interface can be connected to your PC and it only lacks your musical skills. 

The audio interface has 2 XLR inputs for microphones with separate volume controls, 2 line outputs, 1 MIDI input and 1 MIDI output. There is no MIDI Thru. The compactness of the UR22 does not allow this, which is fine. In addition, one LED light per input signals the peaks and another LED installs the 48 Volt USB interface. There is no phantom power. To operate the device, 2.5 watts are necessary.

Yamaha Steinberg USB Drivers Download

It is important to know that the Steinberg UR22 has only two audio inputs that can be used simultaneously. And since no ADAT ports are available, the number of inputs can not be increased later. For live bands or drummers, the audio interface is therefore not suitable. If you're looking for something good for a regular jam session with friends, watching Youtube videos or using streaming platforms like Twitch, that's very good advice. Recording made easy.

How to install/additional information
Please double click on the downloaded ZIP-file. Another double click on the "Setup.exe" (Windows) or the "Yamaha Steinberg USB Driver" package (Mac) starts the installation. Please read the "Installation Guide" inside the unzipped folder carefully before installation!

Windows only: The Yamaha Steinberg USB driver V1.10.1 solves a problem in which audio drop-outs may occur on systems that do not generate a proper USB time stamp information. The USB time stamp refers to the USB frame number on the USB data stream. During our tests to reproduce the issues reported by customers, we found several systems on which the USB frame is not being generated reliably.

Yamaha Steinberg USB Driver


 November 30, 2017      

Mac

Mac OS X 10.9.5 · 10.10 · 10.11 · macOS 10.12 · 10.13*     

June 1, 2018     

Windows

Windows 7 SP1 · Windows 8.1 · Windows 10
Yamaha Steinberg USB Driver 1.9.10-2 · 3.1 MB
Release Notes (PDF)
*Installation notes for macOS High Sierra... 
Yamaha Steinberg USB Driver 1.10.1 · 6 MB
Release Notes (PDF)
Supported hardware:
CI1, CI2, CI2+, UR12, UR22, UR22mkII, UR28M, UR242, UR44, UR824
Supported hardware:
CI1, CI2, CI2+, UR12, UR22, UR22mkII, UR28M, UR242, UR44, UR824, UR-RT2, UR-RT4


Download Drivers Datacard CD800 Card Printer

View Article
Datacard XPS Card Printer Driver v7.3 for Microsoft® Windows® operating systems. The Datacard XPS Card Printer Driver uses Microsoft XPS print technology to support card production using an SD Series, CD8xx Series, CE840 and CR805 systems. The following operating Systems (latest service pack recommended) are supported with the XPS Card Printer Driver v7.3:

Download Drivers Datacard CD800 Card Printer

Compatible:
Windows 10, 32 and 64-bit
Windows 8.1, 32 and 64-bit
Windows 7 SP1, 32 and 64-bit
Windows 2012 R2 Server, 64-bit
Windows 2008 R2 Server, 64-bit

Note: Windows XP, Windows Vista and Windows Server 2003 R2 are not supported by the Card Printer Driver and cannot be installed on these operating systems. Documentation describing the installation and use of the printer and driver can be downloaded from the Documentation tab above.

A readme file is included with this download which describes the new features and fixes.

Thursday, July 5, 2018

SJCAM M10 Firmware Download

View Article
SJCAM M10 Drivers Download. The comes of the M10 + with 2K video recordings and a gyro image stabilizer. Dominates an Action Cam 2K video recordings, then you can actually synonymous with it Full HD with 60fps and 720p120 record.

For this Cam, one decides on the basis of the form. Either you find them visually beautiful or it just fits better to the desired application. In addition, I like the arrangement of the buttons and the battery compartment, which can be opened better than all other models from SJCAM.

SJCAM M10 Firmware Update

SJCAM M10 Firmware

In addition to the possibility to record in 2K, a gyro sensor was added for image stabilization. Can it also do what it promises or is it just a marketing gimmick? Yes it works! And pretty good, too. In the contribution to the HSP Planet, I used the SJCAM M10 + to take pictures while driving and to try out image stabilization.

Download SJCAM M10 Firmware
Note: Before the firmware update, please make sure to use a high quality class 10 memory card, a list of supported cards can be found HERE

To upgrade the firmware properly, follow the steps carefully:

1. Power the camera off.
2. Remove the MicroSD card from the camera.
3. Reformat the MicroSD card using the FAT32 file format on your computer*.
4. Copy the firmware 'bin' file into the root directory of your MicroSD card, please keep the firmware 'bin' file's name.
5. Reinsert the SD card to your camera.
6. Connect the camera with charger, the camera will be upgraded automatically. If your battery was full, you do not need to connect the camera with charger.
7. After the firmware update was completed, please delete the 'bin' file.

*We recommend to do the format under Windows or MAC, some Linux users are getting problems updating because the format is not correct.

SJCAM M20 Firmware Download

View Article
SJCAM M20 Drivers Download. At 1080p resolution with 60fps I lower the sharpness expected due to the sensor used. Several cameras with Sony IMX206 passed through my hands and there was worse. However, it will be seen that it will not be as much a sensor as the lens and the video is more sharp than most competitors with the same hardware.

Even so, I can imagine more sharpness of detail and you can also notice the noise in the video. All of this should be caused by firmware on the camera and fixed with some further updates.

The SJCAM M20 has a slightly worse dynamic range in the video than the SJ5000X Elite, mainly sunlight, but can not be objected to within the camera's price, in this case I recommend playing with camera settings (white balance and exposure). What is important for the action camera is to master the fast movement, but SJCAM cameras have never been a problem (mainly because of the Novatek processor, which belongs to that point of view) and the problem is not even with the M20. The 1080p video stream with 60fps is 30Mbps.

SJCAM M20 Firmware Update

SJCAM M20 Firmware Update

Camera uploads videos to either mov or mp4 format, depending on what you choose in the camera menu. Our test videos were downloaded in mp4 and you can download them without lowering the quality of YouTube: 1080p_60fps, 2K_30fps, 4K_24fps The SJCAM M20 action camera is in the Czech official distribution of 3990Kč (for more information  here ) and you are buying a very decent camera with stabilization using gyroscope, 2K video and 1080p resolution with 60fps. In addition, the remote control shifts the camera in a different direction and makes it easy to work with the camera.

It again fades the poor quality of the recorded sound, as well as some errors in the current firmware version (1.2.4). Fortunately, at least firmware can be repaired and SJCAM has grown accustomed to the fact that it really takes care of its cameras in this case.

Download SJCAM M20 Firmware
Note: Before the firmware update, please make sure to use a high quality class 10 memory card, a list of supported cards can be found HERE:

To upgrade the firmware properly, follow the steps carefully:

1. Power off the camera.
2. Remove the MicroSD card from the camera.
3. Format the MicroSD card using the FAT32 file format on your computer*.
4. Copy the firmware 'bin' file into the memory card, please keep the firmware 'bin' file's name.
5. Reinsert the SD card to your camera.
6. Connect the camera with charger, the camera will be upgraded automatically. If your battery was full, you do not need to connect the camera with charger.
7. After the firmware update was completed, please delete the 'bin' file.

-We recommend to do the format under Windows or MAC, some Linux users are getting problems updating because the format is not correct.

DOWNLOAD FIRMWARE:

Saturday, June 9, 2018

SJCAM SJ4000 Firmware Download

View Article
SJCAM SJ4000 Drivers Download. As on all action waterproof cams, you will first take it out of the box. A simple press on the black clip of the top and everything unlocks. The joints are of quality and inspire confidence. Once the camera is out, we insert the battery (about 80min of autonomy) and it remains only to charge. An electrical outlet, the USB cable and go for a good hour before reaching 100%. A light on the screen indicates the progress of the load. All you need is a micro SD card and we recommend you not skimp on the quality at this level. For example the SanDisk 8Go in Class 10 is the best.

On an 8GB card you can put 60min of video in 1080p and as it will charge the battery every hour I advise you to multiply the cards in 8GB rather than a single big 16 or 32GB. For security, we will format using the SJ4000 . The opportunity to approach menus and navigation via the touch screen.

LCD screen
The menus and settings of the SJ4000 are very intuitive and well localized in French. The touch LCD responds well even with big fingers and logic menus seem even more intuitive than at GoPro . Even if the screen is low definition, it will allow you to frame your plans even in direct sunlight. Playing recorded videos provides comfort and security to check your shots. All the classic shooting modes are available: video, photo and timelapse but you also have a fairly new mode that allows you to use the SJ4000 as a  dashcam.

SJCAM SJ4000 Firmware Update

SJCAM SJ4000 Firmware Download

Action Cam Firmware SJCAM SJ4000 Download
Dashcam mode  is the ability to shoot continuously, especially for the car, with information (date and time) printed on the video. Still little used in Europe, this mode is very popular in Russia and China to serve as video evidence of his conduct in case of accident.

In this mode the camera connected to a cigarette lighter will start at the same time as the car and will film continuously. If the capacity of the card reaches saturation, no worries loop rewritten on the oldest files and so on.

Before the firmware update, please make sure to use a high quality class 10 memory card, a list of supported cards can be found HERE.

To upgrade the firmware properly, follow the steps carefully:

1. Power the camera off.
2. Remove the MicroSD card from the camera.
3. Reformat the MicroSD card using the FAT32 file format on your computer*.
4. Copy the firmware 'bin' file into the root directory of your MicroSD card, please keep the firmware 'bin' file's name.
5. Reinsert the SD card to your camera.
6. Connect the camera with charger, the camera will be upgraded automatically. If your battery was full, you do not need to connect the camera with charger.
7. After the firmware update was completed, please delete the 'bin' file.

*We recommend to do the format under Windows or MAC, some Linux users are getting problems updating because the format is not correct.

DOWNLOAD SJCAM SJ4000 FIRMWARE:

SJCAM SJ5000 Firmware Download

View Article
SJCAM SJ5000 Drivers Download. The manufacturer SJCam is known for its action cams, although the models of the industry leader GoPro look very similar, but are much less to have. So does the SJ5000, which offers full HD resolution, a 2-inch display and numerous accessories. The SJ 5000 comes in typical action-cam design, as a small box with lens. The scope of delivery includes a protective housing, with which the camera can descend up to 30 meters. Numerous mounting options are also included in the accessories. SJCam SJ5000Videos are recorded in full HD at 30 frames per second. In HD, so with 1280 x 720 pixels and 60 frames per second are possible.

The camera captures photos with up to 14 megapixels thanks to a Panasonic CMOS sensor. For image control, a 2-inch display helps. It also displays settings and settings menus. It is operated via five buttons on the housing, which can also be used when the camera is in its protective housing. With the WiFi version, a smartphone can also be used as a remote control.

SJCAM SJ5000 Firmware Update

SJCAM SJ5000 Firmware Download

Action Cam Firmware SJCAM SJ5000 Download
Known by many names! The action cams of SJCam are also distributed under other brand names. Especially known in Germany are Qumox and Ultrasport. The model designations usually remain the same, as do the technical features and functions of the devices. The SJ series has already made a name in the segment of action cams under various brand names. Because the models are affordable and usually offer a pretty good picture quality. This is also praised by users with the SJ-5000, although they can not quite keep up with the models of the GoPro series. It is already available for about 125 EUR on Amazon , in the Wifi version from about 135 EUR.

Before the firmware update, please make sure to use a high quality class 10 memory card, a list of supported cards can be found HERE.

To upgrade the firmware properly, follow the steps carefully: 
1. Power the camera off.
2. Remove the battery and the MicroSD card from the camera.
3. Reformat the MicroSD card using the FAT32 file format* on your computer.
4. Copy the firmware files into the root directory of your MicroSD card.
5. Reinsert the SD card to your camera.
6. Reinsert the battery.
7. Connect the camera with charger, the camera will be upgraded automatically
8. After the firmware update is completed remove the SD card from the camera and format it again on your computer, make sure to use the FAT32 file format*.

We recommend to do the format under Windows or MAC, some Linux users are getting problems updating because the format is not correct.

DOWNLOAD SJCAM SJ5000 FIRMWARE:

Wednesday, June 6, 2018

Download Software for Canon PowerShot SX530 HS

View Article
Canon PowerShot SX530 HS Software Download. Since I had a small digital camera before, the Canon is a huge change, but in a good way.. it is easy to use and makes beautiful pictures. The zoom is the madness in motion makes them great pictures.. finally I can make great pictures of my black dogs and the best for me I finally see the eyes of them. Also find that it is suitable in any case for beginners like me. Canon PowerShot SX530 HS is a very nice camera.

Canon PowerShot SX530 HS Software Free Download

Download Firmware and Software for Canon PowerShot SX530 HS

If you do not necessarily need a SLR camera and still want to take beautiful pictures for you, it's perfect. Insanity zoom and blurred synonymous nothing. I bought the camera Canon PowerShot SX530 for a friend's birthday. I myself am a photographer and use DSLR cameras from Canon but this camera surprised me, really a great camera I can only recommend. Received exactly as promised and very quickly too! Plus, all the manuals and receipts came as promised. I'm very satisfied. Of course, I immediately started with the automatic mode to snap. Macro shots, extreme zoom shots, no problem. Even as a layman succeed with good photos.

The Canon Powershot SX530 does exactly what it should. Good photos. Who whines that the continuous recording is not the hit, complains at a high level, especially since you can not complain at the price of € 249.00. After a week in operation, I'm still satisfied. Meanwhile, I have (estimated) made around 400 photos with the Canon. Everything alright. If they were out of focus, I did not really focus. A camera that is fun and not too expensive I wanted to have. That's exactly what I got! So far, the Power Shot SX530 surpasses all my expectations. That the PowerShot SX530HS needs a lot of battery, I can not say. However, it never hurts to have a spare battery with you.

DOWNLOAD SOFTWARE:
For Mac OS:


For Windows: